工业报警器
工业与机械感结合
工业报警器由探测器与报警控制主机构成,广泛应用于石油、燃气、化工、油库等存在有毒气体的石油化工行业,用以检测室内外危险场所的泄漏情况,是保证生产和人身安全的重要仪器。当被测场所存在有毒气体时,探测器将气信号转换成电压信号或电流信号传送到报警仪表,仪器显示出有毒气体爆炸下限的百分比浓度值。当有毒气体浓度超过报警设定值时发生声光报警信号提示,值班人员及时采取安全措施,避免燃爆事故发生。
本着使用场景的出发点,报警器的设计要符合工业化的特点,但又不能看上去太传统老旧的造型,将显示屏幕做得成大面积的圆屏,给人以更加新颖的视觉感,由圆屏侧面延展出指示灯与操作面模块,既有工业化的感觉,又不缺乏时代性。
● Industrial alarm is composed of detector and alarm control host, widely used in petroleum, gas, chemical, oil depot and other toxic gases in the petrochemical industry, used to detect the leakage of indoor and outdoor dangerous places, is an important instrument to ensure production and personal safety. When there is toxic gas in the measured place, the detector will convert the gas signal into voltage signal or current signal and send it to the alarm meter. The instrument shows the percentage concentration value of the lower limit of toxic gas explosion. When the concentration of toxic gas exceeds the alarm set value, the sound and light alarm signal prompts the duty personnel to take safety measures in time to avoid the occurrence of ignition and explosion accidents.
● In line with the starting point of usage scenarios, the design of the alarm to conform to the characteristics of industrialization, but also can't look too old traditional modelling, to do the display screen into a large circular screen, give a person with more novel visual perception, extend the lamp by the circular screen flank and operation module, the feeling of both the industrialization, and not lack of time.